News

UConn CBE Welcomes Assistant Professor in Residence Jennifer Pascal

Jennifer Pascal on Sept. 15, 2016. (Peter Morenus/UConn Photo)
Assistant Professor Jennifer Pascal  (Peter Morenus)

 

By: Adam M. Rainear

The Chemical and Biomolecular Engineering Department is pleased to announce Jennifer Pascal as an Assistant-Professor in Residence, who will mainly have a teaching emphasis for the department.

Joining UConn after spending three years teaching at her alma mater, Tennessee Technological University (TTU), Dr. Pascal attributes her passion for teaching and education as one of the main reasons for joining UConn.

“The school I was at – I thought – had a nice balance between research and teaching,” she said. “But, it turns out they’re really pushing research.  [And] I really wanted to focus on teaching and engineering education.”

With her new role, Dr. Pascal is most looking forward to improving her classes and refining her teaching abilities.

“Just actually getting to focus on your classes, and try to make them good,” she said.  “Trying new things, because you have time now to prepare and do some different activities and stuff like that.  And then, getting to go to some of the workshops at CETL, and interacting with some of the folks over there.  It’s been exciting, those were the meetings I always liked going to.”

In her first semester here in Storrs, Dr. Pascal co-taught Introduction to Chemical Engineering (CHEG 2103), in addition to Unit Operations and Process Simulation (CHEG 4142). In the upcoming spring semester, she will teach two advanced transport special topics courses and will co-teach the chemical engineering senior laboratory.

Dr. Pascal received her Ph.D. in Chemical Engineering from TTU in 2011, researching Modeling Electrokinetic-based Bioseparations and Learning Transport Phenomena for her dissertation.  From there, she went on to begin her career at the University of New Mexico on a National Institutes of Health postdoctoral fellowship, where she could devote a portion of her fellowship to teaching at a minority serving institution in Albuquerque, New Mexico.

Though she doesn’t have specific research requirements, moving forward Dr. Pascal hopes to continue engaging in research with her new colleagues.

“I’m interested in engineering education research, so I’m trying to get some things going with that and build that up. Before I did mathematical modeling of bio-transport systems, so I’m open.”

Dr. Pascal denotes her father, a former television weatherman in Tennessee, for her passion of all-things science when she was younger.

“I grew up with all this science stuff around – he’s a big nerd – so, weather stations in our house and experiments all the time,” Pascal noted.  “He got me a microscope when I was five – and growing up around that – I’m sure influenced me.”

Professor Emeritus G. Michael Howard Passes Away

 

201701031534-page-0
Prof. Howard at work in his UConn lab.

 

It is with great sadness that we say farewell to our beloved friend and colleague Prof. Emeritus G. Michael Howard.  Prof. Howard was a Professor and former Department Head of Chemical Engineering, as well as former Associate Dean for the School of Engineering during his tenure here at UConn (1961-97).  He will be greatly missed.

 

 

 

 

 

 

 

 

 

 

 

 

Professor Yongku Cho Receives National Institute of Health Grant

cho_yongku_profile

By: Taylor Caron

 

Professor Yongku Cho of the Chemical and Biomolecular Engineering Department has received a research grant from the National Institute of Health, a primary Federal funding source, this past August. His research centers on engineering an antibody that could potentially elucidate the mechanism of neurotoxicity in Alzheimer’s disease.

 

The project, which is being led by Professor Cho, began in September with his graduate student Dan Li, and is focusing on what is known as the Tau protein. The Tau protein exists in brain tissue and is thought to result in neurodegeneration when improperly modified. According to Professor Cho, antibodies are a valuable tool in Alzheimer’s research because they are capable of recognizing these modifications, such as phosphorylation and acetylation of the Tau. However, a critical issue with many antibodies is that they bind unmodified Tau and proteins other than the desired target. This process is called cross-reactivity and can mislead research in Alzheimer’s disease. The focus of Professor Cho and his lab is to develop an antibody which will be more accurate in targeting the defective Tau alone.

 

“One study estimated that half of the antibodies currently sold on the market do not work as intended. A primary reason for this is cross-reactivity,” Professor Cho said.

Professor Cho’s project is entitled Early Detection of Tau Acetylation Using Ultra-High Affinity Antibodies.  There are two primary functions to determine an antibody’s effectiveness: affinity and specificity. Affinity refers to the strength with which an antibody attracts other proteins, and specificity refers to an antibody’s ability so single out an individual protein like the Tau, without cross-reactivity. Professor Cho said much attention has been placed on affinity to the neglect of specificity, but that his project will focus on both.

“The proposal is about affinity and specificity, but I believe it is essential to develop a high-quality antibody that can both isolate the Tau and sufficiently attract it. Affinity and specificity go hand in hand,” he said.

 

Professor Cho spoke about what the Tau looks like under a harmful modification called acetylation, and how the grant from NIH will help him and his team detect it with high sensitivity, allowing to better elucidate its effect on Alzheimer’s disease.

 

“The Tau protein forms a tangle inside the brain that is a hallmark of Alzheimer’s disease,” Professor Cho said. “There are many forms or modifications of the protein, and one is known as acetylation which we believe may be the cause of the neurotoxicity.”

 

Professor Cho and his lab will be working with Dr. Benjamin Wolozin from Boston University to test their antibodies on human tissue samples. He is hopeful that this antibody could someday be used in detecting the early signs of Alzheimer’s disease, and enable the development of therapeutics.

ChEGSA Hosts Halloween Party for Students & Faculty

chegsa-halloween-party-2016

By: Taylor Caron

The Chemical Engineering Graduate Student Association (ChEGSA) hosted a Halloween party for graduate students and CBE faculty on the Friday before Halloween.

 

The room in Engineering II was filled with video games, large pizzas, and tabletops games as CBE members mingled with some decked out in Halloween costumes.

 

Travis Omasta, a graduate student who organized the event, said the aim was to allow for faculty and students to meet and talk with another, which is often the catalyst for both friendship and networking.

 

“The main goal of many of our events, the Halloween party included, is to build comradery and community within the CBE graduates.” Omasta said. “This particular event was held on Friday afternoon during typical work hours so it is easy for students and faculty to come by and socialize.”

 

Introductions and lively conversation was abundant throughout the event. According to Omasta, this is the kind of function ChEGSA regularly hopes to provide to the department, and there are many more events to come.

 

“We consider this event successful as we have all of our events this year, with our primary focus of getting more students involved, especially the ones that don’t know as many people around campus,” he said. “ChEGSA also hosts enriching events such as rapid fire presentations competitions, seminars on job and real work skills, and practices for conference presentations.”

UConn CBE Welcomes Assistant Professor Matt Stuber

Matthew Stuber on Sept. 15, 2016. (Peter Morenus/UConn Photo)
Assistant Professor Matthew Stuber (Peter Morenus).

By: Taylor Caron

 

The Chemical Engineering Department is pleased to announce Matt Stuber as an Assistant Professor whose research focus will be on process systems and optimization.

Professor Stuber received his PhD in Chemical Engineering from MIT, and co-founded a company called WaterFX which is about making conventional approaches to water desalination more efficient and powered by renewables. He said that his work in the private sector was great experience as Director of Process Systems Engineering, and that he is excited to make the shift to academia to continue working on important challenges concerning sustainability and energy.

“WaterFX has been very successful, but I didn’t really find passion in its administration. I’m a scientist and an engineer,” Stuber said. “Sometimes too much of the tech industry is based on growth trajectories and not solving real problems. I decided to refocus my efforts on research and am very pleased to become a member of UConn’s CBE faculty.”

WaterFX, where Stuber led the efforts in all things technical, has gained much attention from national outlets like PBS, National Geographic, and even involvement with The White House, helping shape their efforts in addressing national water challenges. However, Professor Stuber is excited to work with UConn’s Institute for Advanced Systems Engineering which aligns with his experience and interests.

“The new institute has emphasized the kind of research values I consider really important. It’s a great up -and -coming institute which will be a massive force to be reckoned with,” he said.

Professor Stuber’s work at MIT focused on researching and developing theoretical mathematical tools for chemical and energy processes. His research was highly mathematical and he developed algorithms for advanced formal methods in robust and optimal design under uncertainty problems.

Professor Stuber’s research at UConn will continue to focus on process systems engineering, and in particular, rigorous design under uncertainty.

“Process systems is sort of a broad buzz word. It’s a subject of applied mathematics, computer science, and engineering. It applies systems-level thinking to engineered processes,” he said.

Professor Stuber said that his research will be somewhat similar to his work with WaterFx where he developed models and used advanced optimization methods to innovate processes for enhancing efficiency and augmenting them for renewable energy. The company’s ultimate goal is to reduce costs and enhance access to scarce natural resources through sustainable means.

“I’m definitely interested in solving real world problems. Water scarcity is directly related to issues of climate change which is a big part of what attracted me to the issue,” he said. “I’m incredibly glad to be a part of the CBE department to continue to progress this work which has timely and significant benefits to most industries as well as the natural environment.”

Graduate Student Jian Ren Wins NAMS Student Fellowship and AIChE Research Award

img_8698By: Taylor Caron

UConn Chemical Engineering graduate student Jian Ren has received two national awards for her innovative research on water purification. The North American Membrane Society (NAMS) awarded her a Student Fellowship Award this past May, and she will receive a Graduate Student Research Award from the American Institute of Chemical Engineering (AIChE) at the annual meeting this upcoming November.

Both awards are highly selective as the NAMS Fellowship is given to only three students annually, and the AIChE Research Award to only six or eight. Ren said she was very honored to receive the awards, especially the NAMS Fellowship.

“The NAMS Student Fellowship is the highest student award to receive from NAMS, so I am really honored and grateful to receive this recognition in the field of membrane science and technology,” she said. “This would not be possible without the continuous support from my advisor and colleagues.”

Ren has been working with Professor Jeffrey McCutcheon on an energy efficient and cost effective method of purifying water. Conventionally, a process called reverse osmosis is used in seawater desalination and wastewater treatment. Ren’s work uses a process called forward osmosis which utilizes natural osmotic tendency at a lower cost to separate water from contaminants. Her research focuses on developing innovative hollow fiber membranes (HFM) for this process. The HFM is a semi-permeable membrane which requires much less energy than the standard membrane used in reverse osmosis.

These membranes have a straw-like shape and can achieve a high packing density, Ren said. Not only is it more effective while enabling small footprint system, but it is easier to manufacture at a large scale

“The HFM is also self-supported, which makes it easy to prototype in academic labs and manufacture in industry,” she said.

Part of what makes Ren’s research so impressive is that she built her own hollow fiber spinning system at UConn from scratch.

“Professor McCutcheon encouraged me to build the system, and I accepted because I like to challenge myself. Unless you challenge yourself you never know you had such potential,” Ren said.

Senior Design Day 2015

By Sydney Souder

Team 10 CaptionMay 1, 2015 marked the School of Engineering’s much anticipated Senior Design Day. The Department of Chemical & Biomolecular Engineering showcased the projects of 13 teams at the event, a school-wide poster competition held on the floor of the Gampel Pavilion arena.

Each team of students spent the entirety of their senior year on a single open-ended capstone design project. The teams began their journeys with a written description of their project, and a faculty and an industry advisor to mentor them as they tackled the challenge.

Over the next eight months, students presented multiple oral presentations and submitted a range of written reports. The poster competition is the final step where the student’s designs are summarized on a 2’ by 3’ poster board display for the public.

On this ultimate design day, both the posters and students are judged. This year, CBE was pleased to host 14 industry experts to judge the posters. Half of these judges were UConn chemical engineering alumni. Each team of students had their poster and verbal pitch evaluated five times.

Team1CaptionThis year’s assortment of projects varied from inventing a human habitat on Mars, to designing wastewater treatments for Unilever. Visitors were even treated to samples of sugar-reduced ice cream developed by a student team for UConn’s Dairy Bar. The following teams earned the highest scores:

First place was awarded to Team 10 whose project was titled “Novel Production and Purification of Manganese Dioxide.” The team consisted of Nicole Beauregard, Gianna Credaroli, Andrea DiVenere, Naomi Tennakoon and Abbey Wangstrom, and they were advised by Dr. Bill Mustain. Duracell sponsored their project to produce and characterize a more pure electrolytic manganese dioxide for use in alkaline batteries. By incorporating electrolyte additives, impurities in the material can be decreased. A battery with higher capacity can improve Duracell sales, lessen the environmental burden of battery waste products, and enhance the consumers’ trust in their power.

Team4CaptionSecond place was awarded to Team 1 for their project “Oxygen Generation via CO2 and H2O Splitting for NASA Manned Space Missions.” Thomas Gay, Ari Fischer and Oscar Nordness made up Team 1, and they were advised by Dr. George Bollas. Team 1 used a chemical looping process to implement a metal oxide oxygen carrier for the Oxygen Generation System (OGS) in NASA’s International Space Station. Potential benefits of their system could reduce size and mass of the OGS as well as improve its electrical efficiency.

Third Place was received by Team 4 for their project “Defluoridation of Ethiopian Groundwater for Human Consumption.” Dr. Doug Cooper advised the group of Jack Edmonds, Gabriella Frey and George Shaw. Due to the pressing health concerns from fluoride contaminated water, the goal of their project was to design a cost effective method of removing upwards of 90% of fluoride ions in groundwater used for human consumption. Current methods use imported technologies from China which are expensive and prone to shipping delays, especially in third world countries. Team 4 created a new method to defluoride water using magnesium oxide, a mineral already existing in Ethiopia.

“Design day is wonderful conclusion to the undergraduate journey,” says Dr. Cooper, professor and head of the department. “Our students show off their hard work, and visitors enjoy learning about the creative and sophisticated solutions they have developed.”

Anson Ma Wins Arthur B. Metzner Early Career Award

Momentum logoRepublished with permission of Momentum,

a School of Engineering electronic publication.

 

Anson_profile2013

Anson Ma, Assistant Professor in the Department of Chemical and Biomolecular Engineering and the Institute of Materials Science, has been awarded the prestigious Arthur B. Metzner Early Career Award.

The award, which comes with a plaque and a $7,500 honorarium, goes to a young person who has made significant accomplishments in rheology, which is the study of the flow of matter.

Ma was nominated by Malcolm Mackley, Emeritus Professor at Cambridge University, who worked with Ma from 2005 to 2009 on the rheology of carbon nanotubes (CNTs) suspended in epoxy and acrylic resins. In his nomination, Mackley wrote:

Anson, with his meticulous approach to science and rheology made sense of difficult experiments. Working together with Prof Paco Chinesta, who is now at Ecole Centrale des Nantes, Anson was the glue that made the link between experiment and some high level suspension rheological modeling.

At UConn, Ma and his team apply experimental and theoretical rheology to a broad range of important application areas. Since 2011, Ma has supervised three postdoctoral fellows, four PhD students, and three visiting students from France. He has also hosted 21 undergraduate students, three high school teachers, and eight
minority high school students to provide them with early research experience related to rheology. To engage younger students and the local community, Ma has chosen food science and, more specifically, rheology of culinary foams and emulsions as the theme for his outreach plan.

Research Insight: Nanostar

By Sydney Souder

Photo of Dr. Nieh posing with the Nanostar SAXS machine by BrukerDr. Mu-Ping Nieh hopes to discover elusive secrets in the nano-structures of functional materials using the new X-ray scattering machine he and his collaborators have secured for the University of Connecticut. His work focuses on the study of soft materials, and in particular, understanding their nanoscopic structures to optimize their functions. With the new, top-of-the-line Nanostar SAXS instrument, Dr. Nieh expects to take his research to the next level.

Acquired through a competitive National Science Foundation Major Research Instrumentation (MRI) Grant, the Nanostar SAXS is a sophisticated instrument that allows researchers to probe the nanostructures of materials in a large sample area. Specifically, it can identify the shape, size, aggregation behavior, polydispersity, interparticle interactions and surface (interfacial) area of a system.

The instrument works by sending an X-ray beam at a sample of interest. As the X-ray hits the sample, the beam diffracts and scatters into different angles. This scatter pattern can reveal information on the nanostructure of the sample. The method can be applied to a broad range of materials including liquids, solids, thin films and gels. This makes the tool valuable for those investigating the structure-property relationship substances. It also enables industry partners to perform fundamental research and to design and develop materials . Dr. Nieh hopes to build on this interest by establishing a regional center for nanostructural characterization for UConn and industrial partners.

Beyond current and collaborative research, having access to the instrument is also an invaluable opportunity for students. “The Nanostar instrument will be used to train the next generation of scientists and engineers through hands-on research experience,” says Dr. Nieh. “I encourage potential research and industry partners to contact me if they would like to learn more.” Dr. Nieh will teach a webinar course “Small Angle X-Ray Scattering (SAXS) for Nanostructural Characterization” to the public through the Institute of Materials Science’s Affiliate Program later this year.

Bollas Receives Mentorship Excellence Award

By Sydney Souder

Photo of Dr. Bollas speaking at 2015 Frontiers for Undergraduate Research Poster Exhibition after receiving his Mentorship Excellence AwardDr. George Bollas, Assistant Professor of the CBE Department, is the first recipient of the Office of Undergraduate Research’s (OUR) Faculty Mentorship Excellence Award. He received the award at the 18th Annual Frontiers in Undergraduate Research Poster Exhibition on Friday, April 10, 2015.

With this award, OUR recognizes the critically significant role that mentors play in supporting their undergraduates’ research and creative activity. A committee of OUR Peer Research Ambassadors selected one faculty recipient and one graduate student for the Mentorship Excellence Award recognizing their dedication to their students.Photo of Dr. Bollas with the undergraduate mentees who nominated him (from left): Clarke Palmer, '16 (ENG), Oscar Nordness '15 (ENG), Ari Fischer '15 (ENG).

Ari Fischer, one of his mentees who contributed to his nomination, presented the plaque to Dr. Bollas. Fischer commended Dr. Bollas’ extraordinary commitment to challenging and supporting his students. He attributes Dr. Bollas’ influence to helping his mentees achieve their research, personal, and professional goals. Dr. Bollas has helped his students formulate their own research projects, apply for fellowships and publish their own work.

Bollas’ current research group consists of seven Ph.D. students, one Masters student, and 10 undergraduates. Fischer asserts that Dr. Bollas’s dedication is not limited to just those in his lab, but to all of his students; he pushes them to get the most out of their education.

Although honored by his new plaque, Dr. Bollas explained what he considers his real prize. “At the end of the day we’re given the opportunity to spend time with these amazing, fresh minds hungry for knowledge and work, and that is what is most rewarding.”